· 始于2011年
提供整套模切的解决方案
+86 139 2551 0080
+86 133 0269 7425
新闻详情

无痕挂钩

发表时间:2026-01-07 11:48

无痕挂钩承重强,可反复使用,寿命长,不伤墙面,适用于各种平滑表面厨房挂物、卫浴、卧室,贴着后完全防水、防油、防尘、可用清洁剂冲洗。产品原料为植物酸,松脂,纤维素及其它。The traceless hook has strong load-bearing, can be used repeatedly, has a long life, does not hurt the wall, and is suitable for all kinds of smooth surface kitchen hangings, bathrooms, bedrooms, and is completely waterproof, oil-proof, dust-proof, and can be washed with detergents. The raw materials of the products are vegetable acid, pine resin, cellulose and others.

图片

起源origin

无痕挂钩应该从吸盘被推广使用的时刻就已经实际存在了。只是当时侧重点在于宣传它的方便性,而没有引入环保的理念,无痕被忽略。这个名称真正的推广是04年,而且确实是国人首创的,但当时其产品全部出口到欧美及东南亚市场。标注的是可无限制移位,无痕。是针对国外对环保的重视,把无痕作为一个理念去推广

无痕概念Traceless concept

无痕大多的理解是针对钩子本身的。但实际上这无痕同时是针对接触面的。比如双面胶挂钩,在使用过程中脱落,那墙壁上会有很难清理掉的痕迹,这是钩子本身造成的,而吸盘以及由此衍生出的静电膜式挂钩就不存在这现象,所以这是针对钩子本身的无痕。当我们需要安装挂件的时候,更多的是用膨胀螺丝固定,在墙壁上打眼钻孔。这就造成了墙壁的破坏。墙壁本身就有了痕迹。是人为性的又不得不采取的方式。这种破坏式安装是传统的,无痕更重要的就是替代这种现象。Traceless is mostly understood for the hook itself. But in reality, this non-marking is also aimed at the contact surface. For example, if the double-sided tape hook falls off during use, there will be traces on the wall that are difficult to clean up, which is caused by the hook itself, while the suction cup and the electrostatic film hook derived from it do not have this phenomenon, so this is for the hook itself without traces. When we need to install the pendant, it is more common to fix it with expansion screws and drill holes in the wall. This caused the destruction of the walls. There are traces of the walls themselves. It's a way that is artificial. This kind of destructive installation is traditional, and it is more important to replace this phenomenon without leaving a trace.

图片

种类class

在国内,无痕挂钩基本上分为三种:In China, there are basically three types of non-marking hooks:

吸盘式无痕挂钩:利用大气压的物理作用而制作的无痕挂钩,这种无痕挂钩比较简单,对使用表面的要求也比较严格,并且会因为时间和热胀冷缩的关系存在两种可能的问题:吸附不紧和不宜取下Suction cup type non-marking hook: the use of atmospheric pressure and the physical action of the production of non-marking hook, this kind of non-marking hook is relatively simple, the requirements for the use of the surface is also relatively strict, and there will be two possible problems because of the relationship between time and thermal expansion and contraction: adsorption is not tight and should not be removed

易取式无痕挂钩:其实易取式无痕挂钩也属于是一种粘胶式无痕挂钩,但由于这种类型的粘胶的两个技术特点,才分出来作为单独的一种类型来介绍。Easy-to-take non-marking hook: In fact, the easy-to-take non-marking hook is also a kind of adhesive non-marking hook, but due to the two technical characteristics of this type of adhesive, it is introduced as a separate type.

图片

技术特点一:感压式粘胶原理首先易取式无痕胶条的粘性是以感压式粘胶技术为基础,即在使用时需要稍微对胶条施加压力,让其更充分的与墙面接触,粘贴24小时后就可以进行正常使用(特别注意不同的胶条有不同的承重范围),感压式的胶条让承重物挂的愈久,反而会粘的愈紧。Technical feature 1: the principle of pressure-sensitive adhesive First of all, the stickiness of the easy-to-take adhesive strip is based on the pressure-sensitive adhesive technology, that is, it is necessary to apply a little pressure to the adhesive strip when using, so that it can be more fully in contact with the wall, and it can be used normally after 24 hours of pasting (pay special attention to different adhesive strips have different load-bearing ranges), and the pressure-sensitive adhesive strip makes the load-bearing object hang for longer, but the tighter it will stick.


技术特点二:弹性延伸技术 感压式粘胶是让胶条能牢固的粘帖在墙壁上,而弹性延伸技术是为了能让胶条不伤墙面的基础上顺利取下而设计的。当想要取下易取式无痕挂钩时,只要轻抚挂钩背座的两端,将底下的胶条向下垂直拉伸,根据剪力分布的原理,胶条上的粘性会瞬间消失。Technical feature 2: elastic extension technology Pressure-sensitive adhesive is to make the adhesive strip firmly adhere to the wall, and the elastic extension technology is designed to make the adhesive strip not hurt the wall on the basis of smooth removal. When you want to remove the easy-to-take non-marking hook, just caress the ends of the hook back seat and stretch the rubber strip under the bottom vertically, according to the principle of shear force distribution, the stickiness on the rubber strip will disappear instantly.

图片

使用方法How to use:

对于第一种吸盘式无痕挂钩来说,其根本点是排净空气,让大气的作用完全彰显。做到这一点,应该根据实际的承载量来采取不同的方式。否则要不达不到目的,要不就显的太累赘。For the first type of suction cup non-adhesive hook, the fundamental point is to remove the air and let the atmosphere fully manifest. To do this, different approaches should be taken depending on the actual carrying capacity. Otherwise, it will either fail to achieve the goal, or it will be too cumbersome.

对于第二种粘胶式无痕挂钩来说,简单来说就是在挂钩后面黏上一个双面胶,对承载物的要求有严格限制。For the second type of adhesive adhesive hook, it is simply to glue a double-sided tape behind the hook, which has strict restrictions on the requirements of the load.

章粤全景2026


分享到:
DongGguang ZhangYue
联系地址:广东省东莞市石碣镇桔洲合和街1号1号楼301室 联系电话:+86 139 2551 0080
客服:+86 133 0269 7425

营业时间:8:00-20:00

> 了解我们
> 产品中心
> 案例展示